Apesin SDR SAN
Application & Dosing
| Dose in relation to ap-plication and degree of soil. Follow below instructions. |
| Sanitary cleaning:Rinse thoroughly with clear water and apply with a clean cloth. |
| For a disinfection cleaning let the product during 15 minutes. |
|
Powdery Oxygen active disinfectant
Product Profile
APESIN SDR SAN is best adapted for both cleaning and disinfection in bath and sanitary areas. The product fulfils the current requirements in terms of hygiene.
It dissolves quickly and easily mineral soiling like scale, lime soap deposits and rust as well as organic soiling like grease and proteinic deposits.
It is registered in the German list of tested cleaners for ceramic surfaces in the surrounding swimming pools.
The disinfecting performance of APESIN SDR san has been examined and tested according to the regulations of the German DGHM/VAH list. Listed in the virucidal product list of the German IHO.
Area of application
APESIN SDR SAN is ideal for thorough and maintenance cleaning in sanitary and swimming pools areas. If using on chrome platings which are in a bad condition color changings (passivation) may occur. Do not use on acid-sen-sitive materials such as marble, copper, aluminum, nylon (polyamide), etc. For absorbent material, such as joints, wet with plenty of water. Before applying, a material compatibility examination in an inconspicuous place is re-commended
Ingredients
Ingredients per 100g: 5,6g LACTIC ACID, 5 – <15% anionic surfactants, perfumes, BUTYLPHENYL METHYLPROPIONAL, HEXYL CINNAMAL[/et_pb_text][et_pb_text _builder_version="4.4.1"]
Sustainable development and production:
Product safety, storage and environmental instructions
Safety: For professional use only. For further information, see Safety Data Sheet. Use biocides safely. Always read the label and product information before use.
Storage: Store at room temperature in the original container.
Environmental: Only give completely emptied packaging to special waste disposer.
pH-value: 